Used Compact Track Loader Prices in 2026: Every Model Priced

Last updated: March 2026

Used compact track loader prices in 2026 range from roughly $18,000 for a high-hour small-frame machine to over $135,000 for a low-hour large-frame CAT 299D3 XE, based on Ritchie Bros auction results and Equipment Watch valuation data. The average used CTL transaction price was $56,300 in Q1 2025, per Equipment World — down from $59,473 a year earlier.

We compiled pricing data from auction results, dealer listings, and industry valuation tools to give you the most accurate picture of what used CTLs are worth right now. Whether you're pricing a Bobcat T76, deciding between a Kubota SVL75 and a Deere 325G, or figuring out what your CAT 289D3 is worth, the tables below cover the numbers.

This guide breaks pricing down by brand, model, and operating hours — the three factors that matter most. CTLs depreciate faster than most heavy equipment categories because the undercarriage is a wear item with a finite life. If you're new to buying used, pair this pricing data with our inspection guide before committing.

What Do Used Compact Track Loaders Cost in 2026?

Used compact track loader prices currently range from about $14,000 for a high-hour small-frame unit to over $135,000 for a low-hour CAT 299D3 XE, based on Q1 2026 Ritchie Bros and Equipment Watch valuations. That wide spread exists because CTLs cover a broader range of capabilities than most equipment categories — from 67 HP utility machines under 8,000 lbs to 110 HP production units pushing 13,500 lbs.

The most commonly traded CTLs — mid-frame models between 75 and 90 HP — sit in the $28,000 to $65,000 range for machines with 1,500-3,000 hours. That's the bracket where landscapers, utility contractors, and small GCs do most of their shopping. US contractors financed 54,269 new CTLs in the year ending February 2025, a 12.9% increase over the prior year per Equipment World — so the used pipeline is deep and getting deeper.

A landscaping contractor in central Florida told us about a recent purchase: a 2021 Kubota SVL75-2 with 2,200 hours picked up at a Ritchie Bros online auction for $36,500. The same model had been listed at a local dealer for $48,000 two weeks prior. That 24% spread between auction and dealer pricing is typical for CTLs.

Used Compact Track Loader Prices by Model

The tables below cover every major CTL model traded in North America, with pricing broken into three hour brackets. These ranges reflect 2019-2024 model years in fair to good condition, sourced from Ritchie Bros, MachineryTrader, and Equipment Watch valuation data.

Small-Frame CTL Pricing (50-74 HP)

Mid-Frame CTL Pricing (75-96 HP)

Large-Frame CTL Pricing (90-110+ HP)

ROC = Rated Operating Capacity (50% tipping load per SAE/ISO). Prices reflect 2019-2024 model years in fair to good condition. Sources: Ritchie Bros, MachineryTrader, Equipment Watch, Q1 2026.

The CAT 299D3 XE sits at the top of the price stack by a wide margin. A 2022 299D3 XE sold for $132,000 at a Lutz Auction Service sale in Texas in June 2024 — the highest individual CTL auction result in the 2024-2025 period per Equipment World. That premium reflects the 299's 110 HP output, 3,500-lb rated operating capacity, and the XE designation (indicating the sealed and pressurized cab plus enhanced hydraulics).

The Takeuchi TL10V2 and TL12V2 consistently trade 10-20% below comparable CAT and Bobcat models despite matching or exceeding specs on paper. The discount reflects a thinner US dealer network — not a quality gap. Takeuchi builds solid machines and has earned a loyal following among operators who do their own maintenance. For buyers comfortable sourcing parts outside the dealer network, Takeuchi represents the strongest value in the CTL market.

Which CTL Brand Holds Its Value Best?

Brand matters more in the CTL market than in most heavy equipment categories, and the dynamics are different from what you might expect. Kubota leads new sales with 27.4% market share, per Equipment World — but CAT and Bobcat dominate used sales, with just 23 units separating them for the #1 spot in used financed transactions.

Retention rates reflect percentage of MSRP retained at 3,000 operating hours, 3-4 year old machines. Source: Equipment Watch residual value forecasts, Ritchie Bros transaction data, 2025-2026.

The takeaway for buyers: CAT delivers the strongest resale if you plan to turn the machine over within 2-3 years. Kubota and Bobcat offer the best middle ground between purchase price and retained value. Takeuchi delivers the lowest entry cost, but plan on keeping it longer — the resale pool is smaller.

How Operating Hours Affect Used CTL Prices

Operating hours are the single most important pricing variable for used compact track loaders — even more so than for larger equipment. CTLs have shorter economic lives than excavators or bulldozers, with most machines reaching the major-rebuild threshold at 5,000-7,000 hours. Equipment World data shows CTLs depreciate roughly $38 per operating hour over their lifecycle.

Here's what each hour bracket means for CTL buyers and sellers:

• Under 1,500 hours: Premium territory. Undercarriage is likely still original and in good condition. Expect to pay 75-100% of the used market ceiling for the model.
• 1,500-3,000 hours: The sweet spot. Most transactions happen here. Tracks may have one replacement cycle left. This is where auction values deliver the best ROI.
• 3,000-5,000 hours: Working-class range. Budget for track replacement ($2,500-$6,000), roller or idler work ($1,500-$4,000), and potential hydraulic repairs. Prices reflect these pending costs.
• 5,000+ hours: Budget territory. At this point, the machine is approaching its economic floor. Only buy here if the purchase price plus anticipated repairs still makes financial sense versus a lower-hour unit.

Before trusting any hour meter reading, know that tampering is a real issue across the compact equipment market. Our hour meter guide explains how to verify readings and spot rolled-back meters. Most 2019+ CTLs from major brands include telematics that can provide independent hour verification.

The Undercarriage Factor: Why CTL Ownership Costs More

The single biggest difference between a compact track loader and a skid steer is what touches the ground. Rubber tracks give CTLs their superior traction and lower ground pressure, but they also introduce a major ownership cost that skid steer tires never match. Undercarriage maintenance typically runs $4 per operating hour on a CTL, compared to roughly $1.50 per hour in tire costs on an equivalent skid steer.

Here's what the undercarriage components cost to replace:

• Rubber tracks: $2,500-$6,000 per set. Expect 1,200-1,600 hours per set in moderate conditions. Abrasive surfaces, rocky terrain, and hot pavement accelerate wear significantly.
• Rollers and idlers: $1,500-$4,000 for a full set. These should be replaced alongside tracks to prevent uneven wear on new rubber.
• Drive sprockets: $800-$2,000 per pair. Typically last 2-3 track sets if maintained properly.
• Full undercarriage rebuild: $5,000-$12,000 all-in (tracks, rollers, idlers, sprockets, and tensioner service).

When evaluating a used CTL, undercarriage condition should be your first inspection point. A machine with good engine and hydraulics but worn-out undercarriage is still a $5,000-$12,000 investment away from full productivity. Factor that into your offer price.

Used CTL vs. Used Skid Steer: Price Comparison

Compact track loaders and skid steers share the same cab, the same hydraulics, and often the same engine. The difference is entirely below the cab — and it shows up in both the purchase price and the total cost of ownership.

A used mid-frame CTL averages $35,000-$55,000 at 1,500-3,000 hours, while a comparable used skid steer runs $25,000-$42,000 in the same condition bracket. That 15-25% premium buys real capability differences:

• Ground pressure: CTLs exert 3-5 PSI vs. 25-45 PSI for skid steers. This means CTLs can work on wet lawns, muddy sites, and sensitive surfaces without leaving ruts.
• Traction: 25-30% more pushing force on soft or uneven ground. CTLs maintain full power on grades and in loose material where skid steers spin.
• Trade-off: Skid steers are cheaper to buy, cheaper to maintain, and better on hard surfaces. They turn tighter and cause less surface damage on pavement or concrete.

For landscapers, utility contractors, and anyone working on unprepared surfaces: the CTL premium pays for itself in capability. For concrete work, warehouse operations, and paved-surface jobs: the skid steer wins on economics.

How Much Are Used CAT Compact Track Loaders?

Caterpillar compact track loaders command the highest used prices in the market by a wide margin. The CAT 259D3 — the most popular mid-frame model — trades between $34,000 and $65,000 for 2019-2024 model years depending on hours. The larger 289D3 runs $44,000-$82,000, and the flagship 299D3 XE ranges from $58,000 to over $115,000 for low-hour units.

CAT took 16 of the top 20 highest-priced CTL auction results in the 2024-2025 period per Equipment World. That dominance in the high-end market reflects the same factors that drive CAT premiums in the wheel loader and excavator markets: 1,600+ North American dealer locations, same-day parts availability, and a deep buyer pool at resale.

What Are Used Kubota CTL Prices?

Kubota dominates new CTL sales with 27.4% market share — 14,893 financed units in the year ending February 2025. Their SVL75-3 is the best-selling new CTL model in North America. On the used side, a 2020-2023 SVL75-2 with 2,000-3,000 hours typically trades around $32,000-$45,000. The larger SVL97-2 in the same condition bracket runs $40,000-$55,000.

Kubota's used pricing advantage sits between CAT's premium and Takeuchi's value pricing. The brand benefits from a massive installed base that keeps parts readily available, and the ag-crossover demand from Kubota tractor owners deepens the buyer pool. The SVL75 and SVL97 are known for reliable hydraulics and comfortable cabs, which supports owner loyalty and resale.

What About Used Bobcat Track Loader Prices?

Bobcat is neck-and-neck with CAT for the #1 spot in used CTL sales, separated by just 23 units in financed used transactions per Equipment World. The T76 (mid-frame workhorse) trades between $34,000 and $62,000 for 2019-2023 models. The larger T86 runs $42,000-$78,000, and the flagship T870 ranges from $45,000 to $85,000.

Bobcat's strength in the used CTL market comes from the largest compact equipment dealer network in North America. Parts availability is exceptional, and most independent shops stock Bobcat components. The Bob-Tach attachment system is also the most widely adopted in the industry, which means the broadest attachment compatibility of any brand.

When Is the Best Time to Buy a Used CTL?

Used CTL prices follow seasonal patterns similar to other compact equipment. Auction volumes peak in Q4 and Q1 as fleet managers rotate machines before year-end and during winter slowdowns. Those high-volume windows produce the best buyer pricing because supply outpaces immediate demand.

Spring and early summer (March through June) bring the highest prices as landscapers, GCs, and utility crews stock up for peak season. If you can buy in November or December and tolerate having the machine sit until spring, expect 10-15% savings versus March pricing on the same model.

2026 Market Outlook

The used CTL market has softened heading into 2026. Average prices fell from $59,473 in Q1 2024 to $56,300 in Q1 2025 — a 5.3% decline, according to Equipment World. Meanwhile, new CTL sales jumped 12.9% year-over-year, which will feed the used pipeline in 2-3 years. For buyers, the current window offers better value than any point since 2021.

Where to Buy (and Sell) a Used Compact Track Loader

The used CTL market runs through the same channels as other equipment categories. Our platform comparison guide covers the full landscape, but here's the CTL-specific breakdown:

1. Auctions (Ritchie Bros, IronPlanet, Purple Wave): Lowest prices, no warranty. Expect 15-30% below dealer pricing. Critical caveat for CTLs: undercarriage condition is difficult to assess from auction photos. If possible, inspect in person or request an IronClad Assurance inspection report.
2. Dealer lots: Higher prices but often include undercarriage inspections, short-term warranties, and financing. Premium of 15-25% over auction. Best for buyers who need a production-ready machine with known undercarriage condition.
3. Private sales and classifieds (MachineryTrader, Equipment Trader, Facebook): Prices fall between auction and dealer. Facebook Marketplace works particularly well for CTLs under $50,000 due to the high volume of landscaping and small contractor buyers.

For sellers, your equipment's current value depends heavily on undercarriage condition and which channel you choose. If speed matters, we provide cash offers on compact track loaders within 24 hours.

Frequently Asked Questions About Used CTL Prices